VERTICAL TURRET LATHES: Live Demo
 
TECHNICAL SPECIFICATIONS OF ‘KARAM’ VERTICAL TURNING CUM BORING MILLS  :
SPECIFICATION UNIT VTL-1 VTL-1.2 VTL-1.5 VTL-2 VTL-2.5 VTL-3
               
Table Diameter mm   1000 1200 1500 2000

2500

 3000
Max. Turning Dia mm   1200 1350 1750 2250 2750 3250
Working Height Under Cross Rail mm   700 1000  1200 1500 1700 2000
Ram Heads on Cross Rail No.   One One One One One One
Vertical Travel of Ram Head mm   450 550 650 750 800 900
Swivel Angle of Ram Head Deg.   +/-35 +/-35 +/-35 +/-35 +/-35 +/-35
Table Speeds No.   6 6 6 6

6

 6
Range of Table Speeds RPM   9 to 90 9 to 90 9 to 90 5 to 50 3 to 30 3 to 30
Feeds for Horizontal & Vertical Travels No.   6 6 6 6 6 6
Range of Feeds, Horizontal & Vertical mm/min   1.5 to 9 1.5 to 9 1.5 to 9 1.5 to 9 0.5 to 5 0.5 to 5
Main Motor Drive H.P.   7.5 10 15  20 25 30
Motor for Vertical Travel of Cross Rail H.P.   2 2 2 3 3 5
Motor for Rapid Traverse H.P.   2 2 2 3 3 5
 
Salient Features to Match Foreign Sophistication :
 
1. The machine is complete with Full Electricals & duly equipped with  Panel Board & Pendent Control Switch      Board for the centralized control.
2. Gear Box for Auto-Feed Ram Head both Vertical & Horizontal is provided.
3. Alloy Steel duly hardened Gears are used.
4. Phosphorus Bronze Nuts are used for Lead Screws
5. 2.5mm Thick Turcite-B Lining is used on RAM/SADDLE.
6. Forced Lubrication with a Motorized Lubrication Pump is provided for the main Rotary Table. Independent      Lubrication Pumps are provided for the Ram/Saddle  &  Cross Rail.
7. Precision Bearings and GUNMETAL guideways combination in the Bed/Table is provided to withstand Radial      &  Vertical Loads.
Previous   Next
 
Home   |   Products    |  Quality   |   Clients  | Awards |   Contact Us |  Catalogue
Website developed & designed by : Miracle Technologies, Jalandhar.